Successful partnerships

LINAX ® PQ1000
Stationary PQ measuring technology in class S as front panel or top rail mounting (96 x 96 mm).

LINAX ® PQ3000
Stationary PQ measuring technology in class A as front panel mounting (144 x 144 mm).

LINAX ® PQ5000
Stationary PQ measuring technology in class A as top hat rail mounting

LINAX ® PQ5000-Rack
Power quality monitoring in electrical networks in 19″ rack according to EN 60297

LINAX ® PQ5000CL-
Multi PQ
Multichannel power quality and load flow for level 7 (low voltage) network.

LINAX ® PQ5000MOBCL
Portable load flow meter for simultaneous and accurate recording of all load profiles.

HDPQ®
Class A Power Quality Analyzer with Touchscreen, Fast Transient Recorder (1μ) and 400Hz Monitoring!

DranXperT ®
Energy/power logger and PQ detection (sags, swells, interruptions and changes in current and harmonics).

SINEAX ® AM1000
Multifunctional energy monitoring meters to record all electrical parameters.
96 x 96 mm for panel or DIN rail mounting.

SINEAX ® AM3000
Power Monitoring Devices (PMD) to record all electrical parameters.
144 x 144 mm for panel mounting.

APLUS
OA PLUS is a complete device for universal measurement, monitoring and analysis of power quality in high-current networks. Highest Swiss quality and maximum customer benefit are the focus. The device is designed for use in power distribution, networks with high distortion in industrial environments and in building automation.

SIRAX ® BM1450
The SIRAX BM1450 multifunctional DC power indicator can be used for monitoring and control in DC systems. These meters measure a variety of electrical parameters such as DC voltage, current, power, energy and more.

SIRAX ® BM1250
The SIRAX BM1250 multifunctional energy and monitoring meter is suitable for fixed installations and for measuring the main electrical parameters in low-voltage installations. The measurement is designed for single-phase or three-phase networks with 2, 3 or 4-wire connections and is used for the safe monitoring of electrical distribution.

SIRAX ® BM1400
The devices are designed for measurements in electrical distribution networks or in industrial plants and machines. All parameters can be configured on site. Modbus RTU (RS485) or Modbus TCP (Ethernet) interfaces are available to connect the devices to higher-level systems.

SINEAX ® DM5
SINEAX DM5S and SINEAX DM5F are freely programmable universal measuring devices for power grids: classic high-precision measuring transducers, suitable for monitoring tasks and retrofit applications in power distribution and industry.

SINEAX ® DM5000
Power Monitoring Device (PMD) for recording large current variables in the distribution network.
DIN rail device with or without display.

SINEAX ® CAM
The high-performance measuring system can determine the current status of the grid, the additional load of non-linear consumers and the overall utilization of the supply system. The interval-free measurement also ensures that every change in the grid is reliably recorded and taken into account in the measurement data and in the storage of extreme values.

SIRAX ® BT5700 (U/I/F/P/Q/S/W/varh/VAh/φ/pf)
The SIRAX BT5700 universal meter is suitable for fixed mounting and measurement of voltage, current, frequency, power, energy (active, reactive and apparent), power factor, phase angle, etc. in low-voltage switchgear. The device is designed for asymmetrical loads in three-phase networks with 3- or 4-wire connection.

SIRAX ® MT7000/MT7050
The SIRAX MT7000 and MT7050 AC/DC current and voltage converters are complete and designed for DIN rail mounting. Common current and voltage transformers, Rogowski coils and temperature sensors (PT100 or NTC) can be connected.

SIRAX ® MT7100/MT7150
The SIRAX MT7100/MT7150 is an all-in-one three-phase energy meter with integrated energy meter and universal current input. It is designed for DIN rail mounting and allows the connection of common current and voltage transformers and Rogowski coils.

AC/DC current transformer with transmitter functionality
The SIRAX BT7000/BT7050 and SIRAX BT7100/BT7150 series are current transformers with integrated transmitter functionality for monitoring single-phase AC or DC applications. Current measurement is carried out galvanically separated from the measured line. The large number of measured variables and the maximum current of up to 300 A AC or 400 DC allow for versatile use of the devices.

SIRAX ® BT5100 (U)
The SIRAX BT5100 measuring transducer is a top-mount DIN rail device used to convert an AC input voltage into a DC current or voltage output signal proportional to the measured value. The AC input voltage and output current/voltage are displayed on the display and mapped to the Modbus interface.

SIRAX ® BT5200 (I)
The SIRAX BT5200 measuring transducer is a top-mount DIN rail device used to convert an input AC current into a DC current or voltage output signal proportional to the measured value. The input AC current and output current/voltage are displayed on the display and mapped to the Modbus interface.

SIRAX ® BT5210 (I SP)
The SIRAX BT5210 measuring transducer is a DIN rail device used to convert an AC input current into a DC current output signal proportional to the measured value.

SIRAX ® BT5300 (F)
The SIRAX BT5300 measuring transducer is a top-mount DIN rail device used to convert an input frequency into a direct current or voltage output signal proportional to the measured value. The input frequency and output current/voltage are displayed on the display and mapped to the Modbus interface.

SIRAX ® BT5400 (P/Q/S/φ/pf)
The SIRAX BT5400 is used to measure and convert active power, apparent power, reactive power, phase angle and power factor of single-phase or three-phase AC systems with balanced or unbalanced load into a proportional DC or DC voltage output signal.

SIRAX BT5600
The purpose of the tap position transducer is to convert the tap position of the transformers into an equivalent analog output. The outputs can be provided as input to the RTU, indicator or recording instrument. Tap position transducers receive a resistance input, which corresponds to the tap position of the transformer. The output is proportional to the tap position.

ENERGYMID EM2281
Multifunctional energy meter for 2-wire network, 230V with direct connection 5(80) A
Ultra-compact 4 TE design (72 mm) with integrated interface
4-Quadrant Metering: Power Purchase and Delivery
Communication via M-Bus, LON, Modbus TCP/BACnet, Modbus RTU, pulse output
Acquisition of THD for current and voltage as well as neutral current IN
Up to 8 rates

METRALINE ENERGY U281
Single-phase digital active energy meter for 2-wire systems, 230 V with direct connection, 5(40) A

METRALINE ENERGY U282
Single-phase digital active energy meter for 2-wire systems, 230 V with direct connection, 5(80) A

SIRAX ® CT600
Summation current transformer
If current measurement is carried out by means of several current transformers to record the total consumption, the secondary currents of each current transformer are added together and the sum is divided by the number of summations (number of inputs). This means that the total consumption can only be recorded with a single measuring instrument. At the output of the summing current transformer, there is a standardized measurement signal
(5 A).

SMART CONTROL
The versatile SMARTCONTROL combines cross-media energy and consumption data acquisition with load management and fault reporting capabilities.

SU1604
SU1604 adder base module – The adder combines proven functions with the latest technology and a flexible, modular housing concept.

SU1624
Pulse input module, 12x S0 for SU1604 adder

METSyS NEC 220 current recorder
METSyS is an economical and easy-to-use three-phase RMS current data logger ideal for any load study application.

SmartGridBox
Scalable intelligent metering systems in field housing for use in distribution boxes

CENTRAX ® CU3000
Flexible solutions for the energy industry
The CENTRAX CU3000 combines the functionality of a highly accurate instrument for heavy current applications with the possibilities of a freely programmable Soft-PLC in a single housing.

CENTRAX ® CU5000
Flexible solutions for the energy sector:
The CENTRAX CU5000 combines the functionality of a high-precision measuring device for high-current applications with the possibilities of a freely programmable PLC in a single housing. The process environment can be connected via communication interfaces, via digital I/Os, analog outputs or relays.

SMARTCOLLECT® SC²
Innovative and scalable multi-component software

SMARTCOLLECT® SC² combines digital measurement data management and SCADA.

PQVIEW®
Stationary measurements with PQView® are possible thanks to a power quality software that maps a complete power quality management system, integrating multiple measuring devices from different manufacturers. Due to its numerous possibilities, the software is mainly used by large distribution network operators.

MOBILE PQ MEASUREMENT WITH ANALYSIS
For fault detection, as well as for more in-depth analysis, additional software is required to support specialists in their work.

CB Manager
For SINEAX DM5x, SINEAX CAM, APLUS, SINEAX VR660/A200R, VS30, SINEAX Vx604s and KINAX HW730

PQIS ®
Power Quality Information System
The software stands out for its excellent functionalities for the acquisition and evaluation of power quality measurement data. Keywords such as standards, automation and information aggregation play decisive roles.

KINAX ® 2W2
Transmitter with non-contact capacitive scanning system to detect the angular position of a shaft.

A load-independent 4…20 mA DC signal proportional to the measured value is available at the measuring output.

KINAX ® 3W2
Transmitter with non-contact capacitive scanning system to detect the angular position of a shaft.

A printed DC signal proportional to the measured value is available at the measurement output.

KINAX ® WT720
The KINAX WT720 transmitter detects the angular position of a shaft without contact and virtually without feedback and converts it into an applied direct current that is proportional to the measured value. It complements the angle transmitter program in a technically sensible way by means of a programmable version with broad technical application possibilities.

KINAX ® WT707
Transmitter with non-contact capacitive scanning system to detect the angular position of a shaft.

A printed DC signal proportional to the measured value is available at the measuring output. Due to its robust design, it is preferably used in mechanical engineering and large shipbuilding.

KINAX ® WT717
Transmitter with non-contact capacitive scanning system to detect the angular position of a shaft.

A 4 to 20 mA DC signal, proportional to the measured value, is available at the measuring output. Due to its robust design, it is preferably used in large machines and in shipbuilding, transport vehicle construction and the chemical industry.

KINAX® HW730/HW730-Ex
Programmable hollow shaft angle transmitter for rugged applications, Ø78 mm

Detects the angular position of a shaft without contact and converts it into an impressed direct current proportional to the measured value.

KINAX® HW730-Modbus/TCP
The KINAX HW730-Modbus/TCP with PoE is a very robust hollow shaft absolute rotation angle transmitter, particularly suitable for use in harsh environments thanks to its high mechanical load capacity. It detects the angular position of a shaft non-contactly and makes it available via Modbus/TCP.

KINAX® N702
The KINAX N702 converts the inclination, proportional to the angle, into a DC signal. The output signal is available in analog format in the form of a current variation (4 to 20 mA). The sensor is non-contact and presents minimal mechanical abrasion on the pendulum.

KINAX® N702-SSI
The KINAX N702-SSI converts the inclination, proportional to the angle, into a DC signal. The output signal is available digitally with the SSI bus interface. The sensor is non-contact and presents minimal mechanical abrasion on the pendulum.

KINAX® N702-CANopen
The KINAX N702-CANopen converts the inclination, proportional to the angle, into a DC signal. The output signal is available digitally with the CANopen bus interface. The sensor is non-contact and presents minimal mechanical abrasion on the pendulum.

KINAX® N702-INOX
The KINAX N702-INOX is a very robust absolute inclinometer, particularly suitable for use in harsh environments thanks to its high mechanical load capacity and hermetically sealed stainless steel housing.

KINAX® N702-INOX HART
The KINAX N702-INOX HART is a very robust absolute inclinometer, particularly suitable for use in harsh environments thanks to its high mechanical load capacity and hermetically sealed stainless steel housing. The housing is extremely resistant to aggressive media such as seawater and cleaning agents.

KINAX® N705-MEMS
The KINAX N705-MEMS is a robust inclinometer in industrial design.

Its reliable tilt angle measurement, high mechanical strength and compact, robust design make it particularly suitable for use in demanding environments. The MEMS sensor elements used are designed for demanding industrial and mobile automation applications.

PME radio module
The PME (Power-Monitor-Energy) option extends the functionality of a base unit from the SINEAX ® AM, SINEAX ® DM5000, CENTRAX ® CU or LINAX ® PQ series to a real energy center by collecting additional information about the energy distribution or consumption of individual loads.

Rogowski ACF 3000
Rogowski coils are quick and easy to install without breaking the circuit and can cover a wide current range.

Rogowski ACF 2004_1
Measurement up to 3800 A.

Rogowski ACMF 1603
Measurement up to 1600 A.

Current clamps
Current clamps 10A/ 1V
Current clamps 100A/ 1V
Current clamps 1000A/ 1V

DRANFLEX 3000XLB/6000XLB
DRANFLEX current sensors are based on the Rogowski principle. They can be used exclusively for measuring AC current by connecting them to the appropriate Dranetz instruments. The flexible sensors allow current measurements in conductors that are difficult to access.

DRANFLEX 3003XLB/6003XLB
DRANFLEX current sensors are based on the Rogowski principle. They can be used exclusively for measuring AC current by connecting them to the appropriate Dranetz instruments. The flexible sensors allow current measurements in conductors that are difficult to access.

DRANFLEX 300MHB
DRANFLEX current sensors are based on the Rogowski principle. They can be used exclusively for measuring AC current by connecting them to the appropriate Dranetz instruments. The flexible sensors allow current measurements in conductors that are difficult to access.

Primary wound current transformers are used wherever small primary rated currents of 1 A or more need to be converted by the measuring system into usable, galvanically isolated secondary rated currents of 5 A or 1 A. Unlike plug-in or cable wound current transformers, wire wound current transformers have 4 screw terminals. Both the primary and secondary current are connected directly via screw terminals on the front and rear.

Bushing type current transformers are used whenever high currents are to be acquired and processed. They are placed directly on the primary conductor (busbar or conductor) through the opening. The secondary side (usually a measuring device, energy meter or display) is connected by front and rear connection terminals.

Split Core Current Transformer
Due to their compact design and easy installation, split-core current transformers are particularly suitable for applications in hard-to-reach locations and with limited space. The separable cores also facilitate installation in cables or busbars.

Summation current transformer
If current measurement is carried out by means of several current transformers to record the total consumption, the secondary currents of each current transformer are added together and the sum is divided by the number of summations (number of inputs). This means that the total consumption can only be recorded with a single measuring instrument. At the output of the summing current transformer, there is a standardized measurement signal
(5 A).

Power quality of bushing type current transformer
The bushing type current transformer for power quality applications ensures high-precision transmission up to 20 kHz and is designed for use in 9 kHz networks with harmonic load.

Bushing type residual current transformer
The bushing-type residual current transformer of the “DACT” type A series detects very small currents. In conjunction with our device variants SINEAX DM5000, AMx000, CENTRAX CUx000 and LINAX PQx000, they can be used for residual and fault current monitoring of machines and plants.

Split core residual current transformer
Thanks to their compact design, easy installation and separable core halves, the “KBU” type A series split-core residual current transformers are ideal for use in applications with difficult access and limited space.

Balanced core current transformers
Thanks to their compact design, cable conversion current transformers are particularly suitable for use in hard-to-reach locations and with limited space. The separable cores also facilitate installation in cables or busbars.

AC/DC current transformer with energy meter functionality
The SIRAX BT7200/BT7250 and SIRAX BT7300/BT7350 series are current transformers with integrated energy meter functionality for monitoring single-phase AC and DC applications. The large number of measured variables and the maximum current of up to 300 AAC or 400 DC at max. 1000 VDC or 800 VAC allow for versatile use of the devices.

AC/DC current transformer with transmitter functionality
The SIRAX BT7000/BT7050 and SIRAX BT7100/BT7150 series are current transformers with integrated transmitter functionality for monitoring single-phase AC or DC applications. Current measurement is carried out galvanically separated from the measured line. The large number of measured variables and the maximum current of up to 300 A AC or 400 DC allow for versatile use of the devices.

SIRAX ® SH100
Shunts are used to measure DC currents, especially at high current levels.

3P current module
3P current module, with triple Rogowski converter

3PN current module
3PN current module, with quadruple Rogowski converter

SMA connection cable
SMA connection cable BM-RCM