Simulador
Fotovoltaico
Fonte de alimentação CC de alta potência
Fonte de alimentação CC programável bidirecional
Fonte de alimentação CC multicanal
Fonte de alimentação CC de alta precisão
Fonte de alimentação CC de bancada de baixa potência
Fonte de alimentação CA de alta tensão
Fonte de alimentação CA de bancada de baixa potência
Fonte de alimentação CA de bancada de alta potência
Simulador de rede
regenerativo
Carga eletrônica regenerativa CC
Carga eletrônica
e simulador de LED
Carga eletrônica CC de alta potência
Carga eletrônica CC de bancada de baixa potência
Carga eletrônica CC multicanal
Carga eletrônica CA/CC regenerativa
Carga eletrônica CA/CC de bancada de baixa potência
Medidor de potência
Testador de baterias
Sistema de carga e descarga de bateria
Software de
simulação
Acessórios
In recent years, as the energy crisis intensifies, renewable energy represented by solar and wind power has been developing rapidly. ITECH provides PV and energy storage testing products and solutions, such as solar modules/arrays, micro inverters (DC-AC), energy storage batteries, energy storage converters, grid-connected/off-grid PV inverters, household energy storage devices, outdoor emergency energy storage power supply, etc. ITECH offers a wide range of high power density products and testing equipment, including PV simulators (up to 2250V/2MW), grid simulators (3U 15kVA, 960kVA max), battery simulators, ITS5300 energy storage battery test system, IT8200 regenerative AC electronic load. Users can easily perform energy storage battery life tests, in-circuit hardware simulation tests, MPPT efficiency tests, grid connection adaptability tests, and home device conversion efficiency tests.
ITECH's new energy vehicle testing solutions are suitable for various tests, such as AC/DC charging station testing, charging interface and on-board charger testing, portable AC charging device testing, AC/DC charging and charging station simulation testing, power battery testing and fuel cell testing. In addition, ITECH has a complete product line of new energy automotive testing equipment, with power up to 1152kW and voltages up to 2250V, including power supply system, battery simulator, AC power supply, DC power supply, DC electronic load, AC electronic load, internal resistance tester, etc. Combined with professional testing software, ITECH provides users with complete, comprehensive and flexible testing solutions.
ITECH provides a comprehensive self-developed battery testing solution, including power supply, electronic load, internal resistance tester, temperature acquisition, industrial PC and other equipment. With professional battery testing software, you can test the cell, pack, module, etc. of various types of batteries, such as battery life test of low-power life science instruments, simulation of effective working conditions of battery packs in electric vehicles, test and simulation of grid-connected energy storage equipment, comprehensive alarm and protection test of railway battery packs, multi-channel battery pack Independent, parallel testing, etc., ITECH provides efficient battery solutions for new energy vehicles, photovoltaic microgrids, IoT, mobile, power tools and other fields.
In the context of carbon neutrality, the electric vehicle market is growing rapidly. Along with the decay of the power battery life to less than 80%, the electrochemical performance of the battery will decline significantly, making it difficult to fully meet the normal power needs of the car, and the battery will enter the end-of-life stage. Comprehensive environmental factors and economic factors, recycling used power batteries is a necessary task.
Semiconductor refers to the material whose electrical conductivity is between conductor and insulator at normal temperature. Semiconductor products are mainly divided into four categories, including integrated circuits (IC), optoelectronic devices, discrete devices and sensors. ITECH provides comprehensive solutions that are suitable for various applications in fields such as packaged IC, semiconductor laser, optoelectronic lighting device, diodes, transistor, FET, thyristor, IGBT, fuse, relay and other discrete devices and sensors. Among them, such as IC aging test, power supply test, continuity test of discrete devices, especially semiconductor laser test, relying on IT6000C's CC/CV priority setting function and loop speed adjustable function, it can effectively suppress startup overshoot.
Power supply is widely used in modern electronic products, and it needs to have certain anti-interference ability, isolation function and protection function in use. Different countries and regions have a series of certification standards for various power supplies entering the market to ensure the quality of products. ITECH has a product line of professional power testing instruments, including AC power supply, DC power supply, DC electronic load, AC electronic load, power analyzer, etc. At the same time, ITECH also provides customized automatic test systems, such as ITS9500 power supply automatic test system, OBC/DC-DC converter automatic test system and portable AC charging device test system, which greatly help users save space, control costs and improve test efficiency. ITECH's power testing solutions are suitable for testing in areas such as various AC and DC power supplies, chargers, communication power supplies, photovoltaic inverters, LED drive sources, car chargers, charging stations.
Electromechanics includes electrical engineering and mechanical engineering. For example, a hand switch is a component. Electrical signal generates mechanical motion. On the other hand, mechanical motion can generate electrical signal as well. This is about electromagnetic theory. DC motor can generate power by mechanical motion (like a power generator) or supply power to mechanical motion (like a motor). ITECH instruments can be widely used in these applications. Take IT6000C/IT6500C as an example, they have excellent performance in motor starting test.
As ITECH cooperated with universities and research organizations, we found that there are various necessary test instruments, such as single or multiple channel programmable power supply, programmable DC electronic load, power analyzer which are usually used in electronics labs or competitions. Professors and engineers focus on developing various cutting-edge technologies. ITECH test instrument can be used in many application fields, such as electrical and electronics, green energy, transportation, automation, communication, materials, physics, medical, environment and so on. The new IT6000 series can be used to test batteries, fuel cells, high-power motors, electroplating processes, EV, solar and photovoltaic inverters, etc. The feedback efficiency of the newly launched IT8000 regenerative electronic load is up to 95%. This is especially welcomed by universities and research organizations.
With the aging of the global population and the increasing number of sick people, there is an increasing demand for medical equipment. The rapid growth in demand for high-end medical equipment such as CT scanners, MRI scanners and high-end ultrasonic diagnostic instruments has driven the expansion of the global medical electronics market. At the same time, the growth of market demand has greatly stimulated medical electronics manufacturers to expand investment and create innovations in this field. ITECH has been keeping pace with the development of the medical electronics industry, providing you with high-precision, high-speed and high-power density battery simulators, AC/DC power supplies, AC/DC electronic loads, power analyzers and other testing instruments. Bring accurate, efficient and energy-saving testing solutions for medical imaging equipment, wearable medical equipment, medical power supplies, medical electronic components, medical robots, drones and other medical electronics applications.
The vehicle control system is based on electronic equipment. The reliability of automotive electronics is directly related to the safety and reliability of the vehicle. ITECH has extensive experience and high-performance products for automotive electronics, automotive central junction boxes, automotive generators, relays, DC motor/DC-DC converter testing, brushless DC motors, automotive fuses, lights and many other fields. In addition, ITECH has a complete line of products related to automotive electronic testing, with power up to 1152kW and voltage up to 2250V. A variety of products have built-in electrical test waveforms of 20 automotive electrical and electronic equipment standards such as DIN40839, ISO-16750-2, SAEJ1113-11, LV124 and ISO21848, allowing engineers to quickly and directly request performance tests and self-edit the required tests.
IoT is becoming more and more popular in today's world. There are many devices that are connected by the internet. ITECH IoT solutions provide power electronics testing for these devices and ensure that they work stably and have good performance. Currently, ITECH IoT solutions have been used in many different applications and fields, such as wireless communication, automotive device market, smart home, wearable devices, and healthcare, etc. The testing items include low power consumption test, battery performance test, communication module power supply test, anti high current test, smart home simulation test, and so on.
SMU Gráfico
Simulador
Fotovoltaico
Fonte de alimentação CC de alta potência
Fonte de alimentação CC programável bidirecional
Fonte de alimentação CC multicanal
Fonte de alimentação CC de alta precisão
Fonte de alimentação CC de bancada de baixa potência
Fonte de alimentação CA de alta tensão
Fonte de alimentação CA de bancada de baixa potência
Fonte de alimentação CA de bancada de alta potência
Simulador de rede
regenerativo
Carga eletrônica regenerativa CC
Carga eletrônica
e simulador de LED
Carga eletrônica CC de alta potência
Carga eletrônica CC de bancada de baixa potência
Carga eletrônica CC multicanal
Carga eletrônica CA/CC regenerativa
Carga eletrônica CA/CC de bancada de baixa potência
Medidor de potência
Testador de baterias
Sistema de carga e descarga de bateria
Software de
simulação
Acessórios
Products
Your Power Testing Solution
ITECH is a global leader in the development of power electronics testing solutions, combining innovation, sustainability, and high performance. With over 700 equipment models available, we offer a complete line that includes programmable AC and DC sources, single- and multi-channel electronic loads, energy meters, and battery testers. Our automated systems serve critical applications such as testing sources, batteries, automotive systems, electric vehicles, solar panels, and component aging. All hardware and software are developed by ITECH, ensuring maximum stability, full compatibility, and a superior user experience. Our mission is to deliver reliable, intelligent, and tailored solutions for laboratories, industries, and research centers that demand the highest precision and efficiency.
SMUs Source and Measurement Units
Multi-channel DC power supplies
High voltage AC sources and
high voltage network simulators
Electronic charges and
LED simulators
Regenerative AC/DC electronic loads
Charging system and
battery discharge
Photovoltaic simulators
IT-N2100 Solar Array Simulators (800W – 1500W)
IT-M3900SAS Bidirectional DC Power Supplies
IT-M3900PV Bidirectional DC Power Supplies
IT6600C Bidirectional DC Power Supplies + SAS1000 (Software)
IT6000C Programmable DC Power Supplies + SAS1000 (Software)
DC power supplies
high precision
AC power supplies
high power
DC electronic loads
high power
Low-power AC/DC benchtop electronic loads
Simulation software
DC power supplies
high power
DC power supplies
low power bench
AC power supplies
low power bench
DC electronic loads of
low power bench
Power meters
Accessories
Bidirectional programmable DC power supplies
Grid simulators
DC regenerative electronic loads
Multichannel DC electronic loads
Battery testers
In recent years, as the energy crisis intensifies, renewable energy represented by solar and wind power has been developing rapidly. ITECH provides PV and energy storage testing products and solutions, such as solar modules/arrays, micro inverters (DC-AC), energy storage batteries, energy storage converters, grid-connected/off-grid PV inverters, household energy storage devices, outdoor emergency energy storage power supply, etc. ITECH offers a wide range of high power density products and testing equipment, including PV simulators (up to 2250V/2MW), grid simulators (3U 15kVA, 960kVA max), battery simulators, ITS5300 energy storage battery test system, IT8200 regenerative AC electronic load. Users can easily perform energy storage battery life tests, in-circuit hardware simulation tests, MPPT efficiency tests, grid connection adaptability tests, and home device conversion efficiency tests.
ITECH's new energy vehicle testing solutions are suitable for various tests, such as AC/DC charging station testing, charging interface and on-board charger testing, portable AC charging device testing, AC/DC charging and charging station simulation testing, power battery testing and fuel cell testing. In addition, ITECH has a complete product line of new energy automotive testing equipment, with power up to 1152kW and voltages up to 2250V, including power supply system, battery simulator, AC power supply, DC power supply, DC electronic load, AC electronic load, internal resistance tester, etc. Combined with professional testing software, ITECH provides users with complete, comprehensive and flexible testing solutions.
ITECH provides a comprehensive self-developed battery testing solution, including power supply, electronic load, internal resistance tester, temperature acquisition, industrial PC and other equipment. With professional battery testing software, you can test the cell, pack, module, etc. of various types of batteries, such as battery life test of low-power life science instruments, simulation of effective working conditions of battery packs in electric vehicles, test and simulation of grid-connected energy storage equipment, comprehensive alarm and protection test of railway battery packs, multi-channel battery pack Independent, parallel testing, etc., ITECH provides efficient battery solutions for new energy vehicles, photovoltaic microgrids, IoT, mobile, power tools and other fields.
In the context of carbon neutrality, the electric vehicle market is growing rapidly. Along with the decay of the power battery life to less than 80%, the electrochemical performance of the battery will decline significantly, making it difficult to fully meet the normal power needs of the car, and the battery will enter the end-of-life stage. Comprehensive environmental factors and economic factors, recycling used power batteries is a necessary task.
Semiconductor refers to the material whose electrical conductivity is between conductor and insulator at normal temperature. Semiconductor products are mainly divided into four categories, including integrated circuits (IC), optoelectronic devices, discrete devices and sensors. ITECH provides comprehensive solutions that are suitable for various applications in fields such as packaged IC, semiconductor laser, optoelectronic lighting device, diodes, transistor, FET, thyristor, IGBT, fuse, relay and other discrete devices and sensors. Among them, such as IC aging test, power supply test, continuity test of discrete devices, especially semiconductor laser test, relying on IT6000C's CC/CV priority setting function and loop speed adjustable function, it can effectively suppress startup overshoot.
Power supply is widely used in modern electronic products, and it needs to have certain anti-interference ability, isolation function and protection function in use. Different countries and regions have a series of certification standards for various power supplies entering the market to ensure the quality of products. ITECH has a product line of professional power testing instruments, including AC power supply, DC power supply, DC electronic load, AC electronic load, power analyzer, etc. At the same time, ITECH also provides customized automatic test systems, such as ITS9500 power supply automatic test system, OBC/DC-DC converter automatic test system and portable AC charging device test system, which greatly help users save space, control costs and improve test efficiency. ITECH's power testing solutions are suitable for testing in areas such as various AC and DC power supplies, chargers, communication power supplies, photovoltaic inverters, LED drive sources, car chargers, charging stations.
Electromechanics includes electrical engineering and mechanical engineering. For example, a hand switch is a component. Electrical signal generates mechanical motion. On the other hand, mechanical motion can generate electrical signal as well. This is about electromagnetic theory. DC motor can generate power by mechanical motion (like a power generator) or supply power to mechanical motion (like a motor). ITECH instruments can be widely used in these applications. Take IT6000C/IT6500C as an example, they have excellent performance in motor starting test.
As ITECH cooperated with universities and research organizations, we found that there are various necessary test instruments, such as single or multiple channel programmable power supply, programmable DC electronic load, power analyzer which are usually used in electronics lab or competition. Professors and engineers focus on developing various cutting-edge technologies. ITECH test instrument can be used in many application fields, such as electrical and electronics, green energy, transportation, automation, communication, materials, physics, medical, environment and so on. The new IT6000 series can be used to test batteries, fuel cells, high-power motors, electroplating processes, EV, solar and photovoltaic inverters, etc. The feedback efficiency of the newly launched IT8000 regenerative electronic load is up to 95%. This is especially welcomed by universities and research organizations.
With the aging of the global population and the increasing number of sick people, there is an increasing demand for medical equipment. The rapid growth in demand for high-end medical equipment such as CT scanners, MRI scanners and high-end ultrasonic diagnostic instruments has driven the expansion of the global medical electronics market. At the same time, the growth of market demand has greatly stimulated medical electronics manufacturers to expand investment and create innovations in this field. ITECH has been keeping pace with the development of the medical electronics industry, providing you with high-precision, high-speed and high-power density battery simulators, AC/DC power supplies, AC/DC electronic loads, power analyzers and other testing instruments. Bring accurate, efficient and energy-saving testing solutions for medical imaging equipment, wearable medical equipment, medical power supplies, medical electronic components, medical robots, drones and other medical electronics applications.
The vehicle control system is based on electronic equipment. The reliability of automotive electronics is directly related to the safety and reliability of the vehicle. ITECH has extensive experience and high-performance products for automotive electronics, automotive central junction boxes, automotive generators, relays, DC motor/DC-DC converter testing, brushless DC motors, automotive fuses, lights and many other fields. In addition, ITECH has a complete line of products related to automotive electronic testing, with power up to 1152kW and voltage up to 2250V. A variety of products have built-in electrical test waveforms of 20 automotive electrical and electronic equipment standards such as DIN40839, ISO-16750-2, SAEJ1113-11, LV124 and ISO21848, allowing engineers to quickly and directly request performance tests and self-edit the required tests.
IoT is becoming more and more popular in today's world. There are many devices that are connected by the internet. ITECH IoT solutions provide power electronics testing for these devices and ensure that they work stably and have good performance. Currently, ITECH IoT solutions have been used in many different applications and fields, such as wireless communication, automotive device market, smart home, wearable devices, and healthcare, etc. The testing items include low power consumption test, battery performance test, communication module power supply test, anti high current test, smart home simulation test, and so on.
In recent years, as the energy crisis intensifies, renewable energy represented by solar and wind power has been developing rapidly. ITECH provides PV and energy storage testing products and solutions, such as solar modules/arrays, micro inverters (DC-AC), energy storage batteries, energy storage converters, grid-connected/off-grid PV inverters, household energy storage devices, outdoor emergency energy storage power supply, etc. ITECH offers a wide range of high power density products and testing equipment, including PV simulators (up to 2250V/2MW), grid simulators (3U 15kVA, 960kVA max), battery simulators, ITS5300 energy storage battery test system, IT8200 regenerative AC electronic load. Users can easily perform energy storage battery life tests, in-circuit hardware simulation tests, MPPT efficiency tests, grid connection adaptability tests, and home device conversion efficiency tests.
ITECH's new energy vehicle testing solutions are suitable for various tests, such as AC/DC charging station testing, charging interface and on-board charger testing, portable AC charging device testing, AC/DC charging and charging station simulation testing, power battery testing and fuel cell testing. In addition, ITECH has a complete product line of new energy automotive testing equipment, with power up to 1152kW and voltages up to 2250V, including power supply system, battery simulator, AC power supply, DC power supply, DC electronic load, AC electronic load, internal resistance tester, etc. Combined with professional testing software, ITECH provides users with complete, comprehensive and flexible testing solutions.
ITECH provides a comprehensive self-developed battery testing solution, including power supply, electronic load, internal resistance tester, temperature acquisition, industrial PC and other equipment. With professional battery testing software, you can test the cell, pack, module, etc. of various types of batteries, such as battery life test of low-power life science instruments, simulation of effective working conditions of battery packs in electric vehicles, test and simulation of grid-connected energy storage equipment, comprehensive alarm and protection test of railway battery packs, multi-channel battery pack Independent, parallel testing, etc., ITECH provides efficient battery solutions for new energy vehicles, photovoltaic microgrids, IoT, mobile, power tools and other fields.
In the context of carbon neutrality, the electric vehicle market is growing rapidly. Along with the decay of the power battery life to less than 80%, the electrochemical performance of the battery will decline significantly, making it difficult to fully meet the normal power needs of the car, and the battery will enter the end-of-life stage. Comprehensive environmental factors and economic factors, recycling used power batteries is a necessary task.
Semiconductor refers to the material whose electrical conductivity is between conductor and insulator at normal temperature. Semiconductor products are mainly divided into four categories, including integrated circuits (IC), optoelectronic devices, discrete devices and sensors. ITECH provides comprehensive solutions that are suitable for various applications in fields such as packaged IC, semiconductor laser, optoelectronic lighting device, diodes, transistor, FET, thyristor, IGBT, fuse, relay and other discrete devices and sensors. Among them, such as IC aging test, power supply test, continuity test of discrete devices, especially semiconductor laser test, relying on IT6000C's CC/CV priority setting function and loop speed adjustable function, it can effectively suppress startup overshoot.
Power supply is widely used in modern electronic products, and it needs to have certain anti-interference ability, isolation function and protection function in use. Different countries and regions have a series of certification standards for various power supplies entering the market to ensure the quality of products. ITECH has a product line of professional power testing instruments, including AC power supply, DC power supply, DC electronic load, AC electronic load, power analyzer, etc. At the same time, ITECH also provides customized automatic test systems, such as ITS9500 power supply automatic test system, OBC/DC-DC converter automatic test system and portable AC charging device test system, which greatly help users save space, control costs and improve test efficiency. ITECH's power testing solutions are suitable for testing in areas such as various AC and DC power supplies, chargers, communication power supplies, photovoltaic inverters, LED drive sources, car chargers, charging stations.
Electromechanics includes electrical engineering and mechanical engineering. For example, a hand switch is a component. Electrical signal generates mechanical motion. On the other hand, mechanical motion can generate electrical signal as well. This is about electromagnetic theory. DC motor can generate power by mechanical motion (like a power generator) or supply power to mechanical motion (like a motor). ITECH instruments can be widely used in these applications. Take IT6000C/IT6500C as an example, they have excellent performance in motor starting test.
As ITECH cooperated with universities and research organizations, we found that there are various necessary test instruments, such as single or multiple channel programmable power supply, programmable DC electronic load, power analyzer which are usually used in electronics labs or competitions. Professors and engineers focus on developing various cutting-edge technologies. ITECH test instrument can be used in many application fields, such as electrical and electronics, green energy, transportation, automation, communication, materials, physics, medical, environment and so on. The new IT6000 series can be used to test batteries, fuel cells, high-power motors, electroplating processes, EV, solar and photovoltaic inverters, etc. The feedback efficiency of the newly launched IT8000 regenerative electronic load is up to 95%. This is especially welcomed by universities and research organizations.
With the aging of the global population and the increasing number of sick people, there is an increasing demand for medical equipment. The rapid growth in demand for high-end medical equipment such as CT scanners, MRI scanners and high-end ultrasonic diagnostic instruments has driven the expansion of the global medical electronics market. At the same time, the growth of market demand has greatly stimulated medical electronics manufacturers to expand investment and create innovations in this field. ITECH has been keeping pace with the development of the medical electronics industry, providing you with high-precision, high-speed and high-power density battery simulators, AC/DC power supplies, AC/DC electronic loads, power analyzers and other testing instruments. Bring accurate, efficient and energy-saving testing solutions for medical imaging equipment, wearable medical equipment, medical power supplies, medical electronic components, medical robots, drones and other medical electronics applications.
The vehicle control system is based on electronic equipment. The reliability of automotive electronics is directly related to the safety and reliability of the vehicle. ITECH has extensive experience and high-performance products for automotive electronics, automotive central junction boxes, automotive generators, relays, DC motor/DC-DC converter testing, brushless DC motors, automotive fuses, lights and many other fields. In addition, ITECH has a complete line of products related to automotive electronic testing, with power up to 1152kW and voltage up to 2250V. A variety of products have built-in electrical test waveforms of 20 automotive electrical and electronic equipment standards such as DIN40839, ISO-16750-2, SAEJ1113-11, LV124 and ISO21848, allowing engineers to quickly and directly request performance tests and self-edit the required tests.
IoT is becoming more and more popular in today's world. There are many devices that are connected by the internet. ITECH IoT solutions provide power electronics testing for these devices and ensure that they work stably and have good performance. Currently, ITECH IoT solutions have been used in many different applications and fields, such as wireless communication, automotive device market, smart home, wearable devices, and healthcare, etc. The testing items include low power consumption test, battery performance test, communication module power supply test, anti high current test, smart home simulation test, and so on.
In recent years, as the energy crisis intensifies, renewable energy represented by solar and wind power has been developing rapidly. ITECH provides PV and energy storage testing products and solutions, such as solar modules/arrays, micro inverters (DC-AC), energy storage batteries, energy storage converters, grid-connected/off-grid PV inverters, household energy storage devices, outdoor emergency energy storage power supply, etc. ITECH offers a wide range of high power density products and testing equipment, including PV simulators (up to 2250V/2MW), grid simulators (3U 15kVA, 960kVA max), battery simulators, ITS5300 energy storage battery test system, IT8200 regenerative AC electronic load. Users can easily perform energy storage battery life tests, in-circuit hardware simulation tests, MPPT efficiency tests, grid connection adaptability tests, and home device conversion efficiency tests.
ITECH's new energy vehicle testing solutions are suitable for various tests, such as AC/DC charging station testing, charging interface and on-board charger testing, portable AC charging device testing, AC/DC charging and charging station simulation testing, power battery testing and fuel cell testing. In addition, ITECH has a complete product line of new energy automotive testing equipment, with power up to 1152kW and voltages up to 2250V, including power supply system, battery simulator, AC power supply, DC power supply, DC electronic load, AC electronic load, internal resistance tester, etc. Combined with professional testing software, ITECH provides users with complete, comprehensive and flexible testing solutions.
ITECH provides a comprehensive self-developed battery testing solution, including power supply, electronic load, internal resistance tester, temperature acquisition, industrial PC and other equipment. With professional battery testing software, you can test the cell, pack, module, etc. of various types of batteries, such as battery life test of low-power life science instruments, simulation of effective working conditions of battery packs in electric vehicles, test and simulation of grid-connected energy storage equipment, comprehensive alarm and protection test of railway battery packs, multi-channel battery pack Independent, parallel testing, etc., ITECH provides efficient battery solutions for new energy vehicles, photovoltaic microgrids, IoT, mobile, power tools and other fields.
In the context of carbon neutrality, the electric vehicle market is growing rapidly. Along with the decay of the power battery life to less than 80%, the electrochemical performance of the battery will decline significantly, making it difficult to fully meet the normal power needs of the car, and the battery will enter the end-of-life stage. Comprehensive environmental factors and economic factors, recycling used power batteries is a necessary task.
Semiconductor refers to the material whose electrical conductivity is between conductor and insulator at normal temperature. Semiconductor products are mainly divided into four categories, including integrated circuits (IC), optoelectronic devices, discrete devices and sensors. ITECH provides comprehensive solutions that are suitable for various applications in fields such as packaged IC, semiconductor laser, optoelectronic lighting device, diodes, transistor, FET, thyristor, IGBT, fuse, relay and other discrete devices and sensors. Among them, such as IC aging test, power supply test, continuity test of discrete devices, especially semiconductor laser test, relying on IT6000C's CC/CV priority setting function and loop speed adjustable function, it can effectively suppress startup overshoot.
Power supply is widely used in modern electronic products, and it needs to have certain anti-interference ability, isolation function and protection function in use. Different countries and regions have a series of certification standards for various power supplies entering the market to ensure the quality of products. ITECH has a product line of professional power testing instruments, including AC power supply, DC power supply, DC electronic load, AC electronic load, power analyzer, etc. At the same time, ITECH also provides customized automatic test systems, such as ITS9500 power supply automatic test system, OBC/DC-DC converter automatic test system and portable AC charging device test system, which greatly help users save space, control costs and improve test efficiency. ITECH's power testing solutions are suitable for testing in areas such as various AC and DC power supplies, chargers, communication power supplies, photovoltaic inverters, LED drive sources, car chargers, charging stations.
Electromechanics includes electrical engineering and mechanical engineering. For example, a hand switch is a component. Electrical signal generates mechanical motion. On the other hand, mechanical motion can generate electrical signal as well. This is about electromagnetic theory. DC motor can generate power by mechanical motion (like a power generator) or supply power to mechanical motion (like a motor). ITECH instruments can be widely used in these applications. Take IT6000C/IT6500C as an example, they have excellent performance in motor starting test.
As ITECH cooperated with universities and research organizations, we found that there are various necessary test instruments, such as single or multiple channel programmable power supply, programmable DC electronic load, power analyzer which are usually used in electronics labs or competitions. Professors and engineers focus on developing various cutting-edge technologies. ITECH test instrument can be used in many application fields, such as electrical and electronics, green energy, transportation, automation, communication, materials, physics, medical, environment and so on. The new IT6000 series can be used to test batteries, fuel cells, high-power motors, electroplating processes, EV, solar and photovoltaic inverters, etc. The feedback efficiency of the newly launched IT8000 regenerative electronic load is up to 95%. This is especially welcomed by universities and research organizations.
With the aging of the global population and the increasing number of sick people, there is an increasing demand for medical equipment. The rapid growth in demand for high-end medical equipment such as CT scanners, MRI scanners and high-end ultrasonic diagnostic instruments has driven the expansion of the global medical electronics market. At the same time, the growth of market demand has greatly stimulated medical electronics manufacturers to expand investment and create innovations in this field. ITECH has been keeping pace with the development of the medical electronics industry, providing you with high-precision, high-speed and high-power density battery simulators, AC/DC power supplies, AC/DC electronic loads, power analyzers and other testing instruments. Bring accurate, efficient and energy-saving testing solutions for medical imaging equipment, wearable medical equipment, medical power supplies, medical electronic components, medical robots, drones and other medical electronics applications.
The vehicle control system is based on electronic equipment. The reliability of automotive electronics is directly related to the safety and reliability of the vehicle. ITECH has extensive experience and high-performance products for automotive electronics, automotive central junction boxes, automotive generators, relays, DC motor/DC-DC converter testing, brushless DC motors, automotive fuses, lights and many other fields. In addition, ITECH has a complete line of products related to automotive electronic testing, with power up to 1152kW and voltage up to 2250V. A variety of products have built-in electrical test waveforms of 20 automotive electrical and electronic equipment standards such as DIN40839, ISO-16750-2, SAEJ1113-11, LV124 and ISO21848, allowing engineers to quickly and directly request performance tests and self-edit the required tests.
IoT is becoming more and more popular in today's world. There are many devices that are connected by the internet. ITECH IoT solutions provide power electronics testing for these devices and ensure that they work stably and have good performance. Currently, ITECH IoT solutions have been used in many different applications and fields, such as wireless communication, automotive device market, smart home, wearable devices, and healthcare, etc. The testing items include low power consumption test, battery performance test, communication module power supply test, anti high current test, smart home simulation test, and so on.
Solutions
In recent years, as the energy crisis intensifies, renewable energy represented by solar and wind power has been developing rapidly. ITECH provides PV and energy storage testing products and solutions, such as solar modules/arrays, micro inverters (DC-AC), energy storage batteries, energy storage converters, grid-connected/off-grid PV inverters, household energy storage devices, outdoor emergency energy storage power supply, etc. ITECH offers a wide range of high power density products and testing equipment, including PV simulators (up to 2250V/2MW), grid simulators (3U 15kVA, 960kVA max), battery simulators, ITS5300 energy storage battery test system, IT8200 regenerative AC electronic load. Users can easily perform energy storage battery life tests, in-circuit hardware simulation tests, MPPT efficiency tests, grid connection adaptability tests, and home device conversion efficiency tests.
ITECH's new energy vehicle testing solutions are suitable for various tests, such as AC/DC charging station testing, charging interface and on-board charger testing, portable AC charging device testing, AC/DC charging and charging station simulation testing, power battery testing and fuel cell testing. In addition, ITECH has a complete product line of new energy automotive testing equipment, with power up to 1152kW and voltages up to 2250V, including power supply system, battery simulator, AC power supply, DC power supply, DC electronic load, AC electronic load, internal resistance tester, etc. Combined with professional testing software, ITECH provides users with complete, comprehensive and flexible testing solutions.
ITECH provides a comprehensive self-developed battery testing solution, including power supply, electronic load, internal resistance tester, temperature acquisition, industrial PC and other equipment. With professional battery testing software, you can test the cell, pack, module, etc. of various types of batteries, such as battery life test of low-power life science instruments, simulation of effective working conditions of battery packs in electric vehicles, test and simulation of grid-connected energy storage equipment, comprehensive alarm and protection test of railway battery packs, multi-channel battery pack Independent, parallel testing, etc., ITECH provides efficient battery solutions for new energy vehicles, photovoltaic microgrids, IoT, mobile, power tools and other fields.
In the context of carbon neutrality, the electric vehicle market is growing rapidly. Along with the decay of the power battery life to less than 80%, the electrochemical performance of the battery will decline significantly, making it difficult to fully meet the normal power needs of the car, and the battery will enter the end-of-life stage. Comprehensive environmental factors and economic factors, recycling used power batteries is a necessary task.
Semiconductor refers to the material whose electrical conductivity is between conductor and insulator at normal temperature. Semiconductor products are mainly divided into four categories, including integrated circuits (IC), optoelectronic devices, discrete devices and sensors. ITECH provides comprehensive solutions that are suitable for various applications in fields such as packaged IC, semiconductor laser, optoelectronic lighting device, diodes, transistor, FET, thyristor, IGBT, fuse, relay and other discrete devices and sensors. Among them, such as IC aging test, power supply test, continuity test of discrete devices, especially semiconductor laser test, relying on IT6000C's CC/CV priority setting function and loop speed adjustable function, it can effectively suppress startup overshoot.
Power supply is widely used in modern electronic products, and it needs to have certain anti-interference ability, isolation function and protection function in use. Different countries and regions have a series of certification standards for various power supplies entering the market to ensure the quality of products. ITECH has a product line of professional power testing instruments, including AC power supply, DC power supply, DC electronic load, AC electronic load, power analyzer, etc. At the same time, ITECH also provides customized automatic test systems, such as ITS9500 power supply automatic test system, OBC/DC-DC converter automatic test system and portable AC charging device test system, which greatly help users save space, control costs and improve test efficiency. ITECH's power testing solutions are suitable for testing in areas such as various AC and DC power supplies, chargers, communication power supplies, photovoltaic inverters, LED drive sources, car chargers, charging stations.
Electromechanics includes electrical engineering and mechanical engineering. For example, a hand switch is a component. Electrical signal generates mechanical motion. On the other hand, mechanical motion can generate electrical signal as well. This is about electromagnetic theory. DC motor can generate power by mechanical motion (like a power generator) or supply power to mechanical motion (like a motor). ITECH instruments can be widely used in these applications. Take IT6000C/IT6500C as an example, they have excellent performance in motor starting test.
As ITECH cooperated with universities and research organizations, we found that there are various necessary test instruments, such as single or multiple channel programmable power supply, programmable DC electronic load, power analyzer which are usually used in electronics labs or competitions. Professors and engineers focus on developing various cutting-edge technologies. ITECH test instrument can be used in many application fields, such as electrical and electronics, green energy, transportation, automation, communication, materials, physics, medical, environment and so on. The new IT6000 series can be used to test batteries, fuel cells, high-power motors, electroplating processes, EV, solar and photovoltaic inverters, etc. The feedback efficiency of the newly launched IT8000 regenerative electronic load is up to 95%. This is especially welcomed by universities and research organizations.
With the aging of the global population and the increasing number of sick people, there is an increasing demand for medical equipment. The rapid growth in demand for high-end medical equipment such as CT scanners, MRI scanners and high-end ultrasonic diagnostic instruments has driven the expansion of the global medical electronics market. At the same time, the growth of market demand has greatly stimulated medical electronics manufacturers to expand investment and create innovations in this field. ITECH has been keeping pace with the development of the medical electronics industry, providing you with high-precision, high-speed and high-power density battery simulators, AC/DC power supplies, AC/DC electronic loads, power analyzers and other testing instruments. Bring accurate, efficient and energy-saving testing solutions for medical imaging equipment, wearable medical equipment, medical power supplies, medical electronic components, medical robots, drones and other medical electronics applications.
The vehicle control system is based on electronic equipment. The reliability of automotive electronics is directly related to the safety and reliability of the vehicle. ITECH has extensive experience and high-performance products for automotive electronics, automotive central junction boxes, automotive generators, relays, DC motor/DC-DC converter testing, brushless DC motors, automotive fuses, lights and many other fields. In addition, ITECH has a complete line of products related to automotive electronic testing, with power up to 1152kW and voltage up to 2250V. A variety of products have built-in electrical test waveforms of 20 automotive electrical and electronic equipment standards such as DIN40839, ISO-16750-2, SAEJ1113-11, LV124 and ISO21848, allowing engineers to quickly and directly request performance tests and self-edit the required tests.
IoT is becoming more and more popular in today's world. There are many devices that are connected by the internet. ITECH IoT solutions provide power electronics testing for these devices and ensure that they work stably and have good performance. Currently, ITECH IoT solutions have been used in many different applications and fields, such as wireless communication, automotive device market, smart home, wearable devices, and healthcare, etc. The testing items include low power consumption test, battery performance test, communication module power supply test, anti high current test, smart home simulation test, and so on.